Skip to content Skip to content
EduFacturing
Applications

3D Printing for Dental Models and Impressions

3D Printing for Dental Models and Impressions

Dental 3D printing is one of the most mature professional uses of the technology, over 95% of dental labs in developed markets use 3D printing for crowns, bridges, surgical guides, and orthodontic clear aligners. In Bulgaria the transformation is slower but steady: dozens of new dental studios open with 3D printing workflow from 2022 onwards. With the right setup (MSLA/DLP printer for €500-€2000 + dental-grade resin + scanner from partner dental practice), one solo dental lab can print 30-50 crowns per day, replacing a 5-week ceramic milling workflow. This guide: typical dental applications, recommended printers, and cost expectations.

What gets printed in a dental lab

Crowns (permanent and temporary): patterns printed in castable resin, then lost-wax cast in cobalt-chrome or gold. Alternative: print directly in ceramic-filled resin (zirconia composite). 3D printed crown ready for patient in 3-5 hours vs 2-3 weeks traditional workflow.

Bridges: same workflow as crowns but with more complex geometry. 3D printing enables complex multi-unit bridges (5+ teeth) impossible to mill conventionally.

Surgical guides: clear or blue resin guides for implant placement. Print directly in Surgical Grade resin (ISO 10993 certified). Used by oral surgeons for precise drill placement.

Orthodontic models: printed patient teeth model for clear aligner trays. Standard resin or dental model resin. ClearCorrect, Invisalign business uses thousands of dental printers for this single application.

Night guards / splints: TPU-like flexible dental resin (Saremco Print Splint, NextDent Ortho IBT). Print directly, no casting needed.

Dentures: full denture base + tooth printing in specialized materials (NextDent Denture 3D+, Detax FreePrint Denture). Replaces 3-4 hour wax-up + casting workflow.

Teaching models: anatomical teeth + jaw models for education. Printed once per design, used hundreds of times.

Implant surgical templates: precision guides for implant placement, custom for each patient.

Anycubic Photon Mono M5s Pro (€529): entry dental MSLA. Build 218×123×200mm: fits 8-10 crowns per batch. 12K display, auto-resin-fill. Recommended for solo dentist starting digital workflow.

Elegoo Saturn 4 Ultra (€499): equivalent capability. Integrated dryer and cure. Best value combination for professional dental.

Formlabs Form 4 (€4500): premium choice. SLA technology, validated dental resin library (35+ approved resins), Form Wash + Form Cure integration. Required for multi-doctor lab serving 50+ crowns/day.

Formlabs Form 4B (€7500) – Form 4 + ISO 13485 medical workflow. Required for labs that ship crowns directly to patients (vs through dentist intermediary).

Anycubic Photon D2 (€471): DLP option. Long-term durability (no LCD replacement) makes it production-friendly. Slightly smaller build than MSLA equivalents.

Asiga MAX UV385 (€10,000+): professional dental DLP. Validated workflow for all major dental software (3Shape, exocad, DentBird). Required for high-volume labs.

For solo dentist starting digital: Anycubic M5s Pro (€529) + Wash & Cure Plus (€110) + 1L Cast resin (€100) + scanner partnership = €739 setup. Pays back in 50-80 crowns.

Crown patterns (for casting):

NextDent Cast (€120-€150/liter): industry standard for crown casting patterns. Burns clean at 730°C.

Formlabs Castable Wax (€199/liter): Form 4 only. Industry gold standard.

Direct crown materials (no casting):

Formlabs Permanent Crown V2 (€399/liter): ceramic-filled, prints directly to permanent crown. CE/FDA approved.

Saremco Print Crown (€350/liter): equivalent to Formlabs Permanent.

NextDent C&B (Crown and Bridge) (€280/liter): temporary crowns.

Surgical guides:

Formlabs Surgical Guide (€199/liter) – clear, ISO 10993 certified.

NextDent SG (€180/liter): equivalent.

Detax FreePrint Surgical Guide (€200/liter): German manufacturer.

Orthodontic models:

NextDent Model 2.0 (€90/liter): fast print, less premium but sufficient for clear aligner production.

Formlabs Grey V5 + slight tinted: many labs use standard grey for models.

Night guards / splints:

NextDent Ortho IBT (€220/liter): biocompatible, FDA/CE approved.

Saremco Print Splint (€250/liter): equivalent. Used by Invisalign network.

Daily lab workflow

Workflow for 5-10 crown lab using Anycubic Mono M5s Pro + NextDent Cast:

8am: lab open. Power on printer, Wash & Cure station, burnout kiln.

8:30am: receive 5-8 STL files from CAD designer (3Shape, exocad, DentBird). Quick review for printability.

9am: slice in Anycubic Workshop with dental preset. Orient crowns margin-down on platform. Auto-generate supports.

9:30am: start print. Batch of 8 crowns on M5s Pro: 90-120 minutes.

11am: print complete. Wash 3 minutes IPA 99%, dry 5 minutes.

11:15am: SHORT cure ONLY (2-3 minutes per side for castable). Remove supports while leather-hard.

11:30am: inspect under loupe. Quality check: re-print any defective patterns (~5-10% defect rate first month, drops to <2% with experience).

12pm-1pm: lunch break. Patterns ready for sprueing.

1pm-2pm: sprue assembly. Attach 8-12 patterns to single wax tree.

2pm: investment pour. Allow 2 hours for investment to set in flask.

4pm: start burnout cycle (5-6 hours overnight ramp).

8am next day: cast metal (cobalt-chrome, gold, titanium). Devest, finish, polish, finalize.

Daily output: 5-10 finished crowns shipped to dentist client. Lab time: 4-6 hours hands-on. Material cost per crown: €5-€10 (resin €2 + investment €1 + metal €3-€7). Lab charges dentist: €60-€150 per crown. Dentist sells to patient: €200-€500.

Cost + ROI analysis for digital dentist starting up

Setup costs:

Minimum digital dental setup (1 dentist, in-office printing): Anycubic Mono M5s Pro: €529 Anycubic Wash & Cure Plus: €110 Initial materials (1L Cast + 1L Surgical Guide + 1L Model): €300-€400 Software (Lychee Slicer 1-year): €60 Total: €1000-€1100

Without casting (direct print only): same setup minus burnout kiln. €1000-€1100.

With casting (full lab): add €500-€2000 burnout kiln + €800-€3000 centrifugal or vacuum caster. Total €2500-€5000.

Professional medium lab setup: Formlabs Form 4: €4500 Form Wash + Form Cure: €1400 Initial materials (3L variety): €700 Total: €6600

Production lab setup (10+ crowns/day): Form 4 × 2 units (redundancy): €9000 Form Wash + Form Cure: €1400 Asiga MAX UV385 (high-volume DLP): €12,000 Burnout kiln (industrial): €5000 Vacuum casting: €4000 Total: €31,400 (capacity 30-50 crowns/day)

ROI: Solo dentist: 50-80 crowns sold to patients pays back €1100 setup. Typically 2-4 weeks at modest pace. Medium lab: 200-300 crowns pays back €6600. Typically 2-3 months. Production lab: 1500-2000 crowns pays back €31K. Typically 4-6 months at full capacity.

Frequently Asked Questions (FAQ)

Q: Is special certification required for dental 3D printing in Bulgaria?
A:
Not for in-lab use (printing models, patterns, in-office tools). Yes for direct patient sales (crowns directly placed in patient’s mouth): requires CE Mark and Bulgaria’s specific medical device registration (BDA). Permanent crown resins like Formlabs Permanent Crown vs Saremco Print Crown come pre-certified: buy approved resins.
Q: How much does a 3D printed crown cost vs traditional?
A:
3D + casting workflow: €5-€10 cost per crown (resin + metal). Lab charges dentist €60-€150. Dentist sells patient €200-€500 (gold/cobalt-chrome crown).

Traditional ceramic milling: €30-€80 cost per crown (ceramic block + milling time). Lab charges €100-€250. Dentist sells €350-€700.

3D printing with casting is cheaper on material but has longer lead time (1-2 days for burnout cycle). Traditional milling is faster (1-2 hours per crown) but more expensive. Most labs use both depending on case.

Q: Is a digital scanner needed?
A:
Yes, without a 3D scan of patient dentition, the digital workflow is incomplete. Intraoral scanners: iTero (€20,000), Trios 3Shape (€18,000), Medit i700 (€8,000), Aoralscan 3 (€4,500, Chinese alternative). For lab partnerships, scanner lives in dental practice, files shipped to lab. Solo dentist with in-office printing needs scanner for full setup.
Q: Workflow software for dental design?
A:
exocad (€10,000+ initial + €1500/year): industry standard, most features. 3Shape Dental System (€15,000+): premium choice, integrated with iTero. DentBird (€100-€200/month subscription): cloud-based, growing alternative. ChairsideCAD (€8,000+): on-premise, less expensive than 3Shape.

Interactive Analyzer for 3D Printing For Dental Models And Impressions

Select a profile to view detailed analysis.

Strength / Durability 87%
Print Speed 61%

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).