Skip to content Skip to content
EduFacturing
Brands

Anycubic – Brand Overview

Anycubic – Brand Overview

Anycubic is a Chinese 3D printer maker founded in 2015 in Shenzhen. The company specializes in the budget-prosumer market, between truly cheap anonymous Chinese brands and premium Prusa/Bambu. Anycubic is best known for MSLA printers (Photon series: 5 generations, market leader in the budget resin segment) and FDM Kobra series. With over 1 million printers shipped by 2024, Anycubic is the third-largest consumer 3D print brand globally, after Creality and Bambu. This guide: the product range, when Anycubic is the right choice, and compared against Elegoo (their main competitor).

History

Anycubic founded 2015 by James Ouyang in Shenzhen. First product: Anycubic Mega FDM (2015), low-cost competitor to Prusa i3 kits. In 2018 launch of Photon SLA: €350 LCD-based resin printer when other resin machines were €1500+. Photon series was a singular disrupting force in the budget resin market.

By 2024 Anycubic has 4 main product lines: Photon (MSLA), Kobra (FDM), Vyper (legacy FDM), and Wash & Cure stations. Over 50% of revenue comes from MSLA: domain where they directly compete with Elegoo.

Controversies: aggressive marketing (over-promising specs), some early models (Mega Pro) had QC issues. Recent (2023+) generations (Mono M5s, Kobra 2 Max) are significantly more reliable. Firmware is closed-source but not as aggressively locked as Bambu: community modifications relatively easy.

Product range

MSLA / Resin printers:

Photon Mono M5s (€368): 12K display, 200×125×200mm build, auto-leveling, auto-resin-fill. Recommended for beginners MSLA, miniatures.

Photon Mono M5s Pro (€529): adds larger build 218×123×200mm, print-time predictor. For hobbyists ready for batch work.

Photon M3 Max (€699): 7K large format, 298×164×300mm build. Recommended for large resin parts (helmets, props).

Photon D2 (€471): DLP technology (not MSLA), better long-term hardware durability (no LCD replacement), but smaller build 130×73×165mm. Premium for budget-conscious users.

FDM Printers:

Kobra 2 Neo (€200): entry FDM, 220×220×250mm build, auto-leveling. Recommended for beginners on budget < €250.

Kobra 2 (€280): upgrade with better hotend, up to 250 mm/s speed. Recommended for hobby starters.

Kobra 2 Max (€450): large format 420×420×500mm build, powerful production printer for large parts.

Kobra 2 Plus (€350): middle ground.

Wash & Cure Stations:

Wash & Cure Plus (€110): best-in-class for MSLA post-process. Automates wash + cure cycles.

Anycubic ecosystem

Photon Workshop: proprietary slicer for MSLA. Basic functional, but most users prefer Lychee Slicer (€60/year, much better support placement) or ChiTuBox (free, similar to Workshop).

Anycubic Slicer, for FDM Kobra series. Cura-based fork. Usable but not as polished as PrusaSlicer or Bambu Studio.

Filament and Resin: Anycubic-branded (Anycubic Standard Resin, Anycubic ABS-like, Anycubic PLA+). Quality decent, competitive €18-€30/liter resin, €25-€30/kg filament. Not at Polymaker or Prusament level, but acceptable for hobby.

App: Anycubic Cloud mobile app for remote monitoring (limited camera support).

Community: Anycubic Facebook groups (200K+ members), Reddit r/AnycubicPhoton, official Discord. Active troubleshooting community.

Third-party support: Lychee Slicer (premium), ChiTuBox (free), etc. have Anycubic profile presets ready.

vs Elegoo

Direct competitor is Elegoo: nearly identical product range, similar pricing. Differences:

Photon Mono M5s vs Elegoo Mars 5 Ultra:

  • Equivalent specifications, 12K display on both
  • M5s: by-design auto-resin-feed (Elegoo doesn’t)
  • Mars 5 Ultra: slightly larger build (143×89 vs 200×125)
  • Cost: M5s €368 vs Mars 5 €280, Elegoo bargain
  • Verdict: Mars 5 if budget, M5s if value auto-feed convenience

Saturn 3 Ultra vs Photon Mono M5s Pro:

  • Elegoo Saturn 3 (€402) larger build 218×123
  • M5s Pro (€529) adds print-time predictor
  • Verdict: Saturn 3 winner on cost/capability

Kobra 2 vs Elegoo Neptune 4:

  • Similar specs, similar price
  • Kobra 2: auto-bed-leveling more reliable
  • Neptune 4: better community, more upgrade paths
  • Verdict: tie, choose by community support preference

Generalization: Elegoo cheaper, Anycubic slightly more refined. For MSLA newbies: Elegoo. For professional MSLA: either. For FDM: Elegoo cheaper, but neither matches Bambu A1 quality at equal price.

When Anycubic is the right call

We recommend Anycubic when:

  1. Beginner MSLA on budget: Photon Mono M5s is the standard recommendation. €368 + Wash & Cure Plus €110 = complete setup at €478.

  2. Batch miniature printing: Saturn 3 Ultra (€402) or Photon Mono M5s Pro (€529) for large platform.

  3. Hobby FDM on budget: Kobra 2 series. Don’t expect Bambu quality, but €200-€300 offers OK printer for PLA prototypes.

  4. Big resin prints: Photon M3 Max (€699) for helmets, props, large-format cosplay.

Not recommended when:

  1. Professional design work: Bambu X1-Carbon (€1449) is significantly better OOBE and quality.

  2. Heavy production farm: Prusa MK4S is more reliable long-term, EU service.

  3. Multi-material multi-color: Anycubic FDM has no AMS-equivalent. Bambu owns this space.

  4. Strict QC environments: Anycubic firmware closed, less auditable than Prusa.

Value proposition: Anycubic is best price/capability in MSLA segment under €700. Above that, Phrozen or Prusa give better quality.

Frequently Asked Questions (FAQ)

Q: Anycubic Photon Mono M5s or Elegoo Mars 5 Ultra?
A:
Mars 5 Ultra (€280) cheaper and absolute newcomer choice. M5s (€368) if you value auto-resin-feed convenience. Print quality equivalent: both print miniatures at 8K detail. For total cost (printer + Wash & Cure): Elegoo Saturn 3 Ultra (€402) + Mercury Plus (€100) = €502 is the best combined deal.
Q: How long does Photon LCD last?
A:
Mono LCD service life: ~2000 print hours typical, 4000 max. Replacement LCD: €30-€60. Recommend keeping a replacement-ready spare with the printer. DLP printers (Photon D2) don’t have this issue (light engine instead, 10x longer life).
Q: Kobra 2 or Bambu A1 mini?
A:
A1 mini (€280) always: same price as Kobra 2, significantly better firmware quality (input shaping, auto-load, AMS Lite ready). Bambu’s software ecosystem is on a different level. Kobra 2 only if you prefer larger build (220×220×250 vs A1 mini’s 180×180×180).
Q: Anycubic support from Bulgaria?
A:
Anycubic EU warehouse (Poland, Germany): ship-back service. No on-place. Service time 2-3 weeks. Compared with Bambu (ship-to-China, 4-6 weeks): Anycubic faster. Compared with Prusa (EU partners on-place): Prusa faster. For serious production use, Prusa is better support.

Interactive Analyzer for Anycubic, Brand Overview

Select a profile to view detailed analysis.

Strength / Durability 78%
Print Speed 80%

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).