Skip to content Skip to content
EduFacturing
Applications

3D Printing for Miniatures and Figurines – Complete Guide

3D Printing for Miniatures and Figurines – Complete Guide

Printing miniatures (Warhammer 40K, D&D, Pathfinder, historical models, collector figures) is one of the most popular hobby applications of 3D printing in Bulgaria. With the right printer and resin, you can print 30 mm miniatures with fine details (armor textures, facial expressions, separate feathers and weapons) at quality unattainable outside professional services 5 years ago. This guide shows which tech (MSLA vs SLA vs DLP) is optimal, which printers we recommend by budget, which resins work best, and how to post-process without destroying detail.

Why resin, not FDM, for miniatures

FDM printers use melted plastic with minimum resolution 0.20 mm (200 µm). On a 30 mm miniature, each layer is 200/30 = ~0.7% of the entire model: layers visibly show, fine details (feathers, smoke, threads) are impossible.

MSLA/SLA/DLP printers use UV light to cure liquid resin. Z-axis resolution is 25-50 µm (4-10x better than FDM), XY-axis 19-50 µm. On tiny models this is virtually perfect. A 30 mm miniature at 0.05 mm layers = 0.17%: layers invisible after basic post-process.

Another factor: batch printing. On MSLA, one layer’s time doesn’t depend on the number of objects on the build plate. You can fit 50 miniatures on a 220 mm plate and print all at the same time as one. On FDM, 50 miniatures = 50x the time.

Under €300: Elegoo Mars 5 Ultra or Anycubic Photon Mono M5s. 4K-12K display, build volume enough for 1-2 large miniatures or 10-15 standard. Mars 5 for beginners, Mono M5s for community support depth.

Under €500: Anycubic Photon Mono M5s (€368) or Elegoo Saturn 3 Ultra (€402). Saturn has larger platform (218×123 mm), ideal for batch printing dozens of miniatures for a Warhammer army.

Under €1500: Phrozen Sonic Mega 8K S (€1499). Large platform (330×185 mm), 8K resolution. Recommended for studios and serious collectors.

Pro: Formlabs Form 4 (€4500+). SLA tech (laser, not LCD). Different resolution, higher quality for extreme detail, but workflow more complex and resins pricier.

For most users: start with Anycubic Mono M5s or Elegoo Saturn 3 Ultra. Both print gaming miniatures at commercial-casting level.

Siraya Tech Tenacious (Tough Resin): gold standard for gaming minis. Impact-resistant (doesn’t shatter when mini falls off the table), detail equivalent to standard resin. €40-€50/liter.

Phrozen Aqua Gray 8K: optimized for high-resolution MSLA. Gray (best for seeing detail during print). Easier post-process than tough variants. €30-€35/liter.

Anycubic ABS-like Resin: good impact resistance, mid-tier €25/liter. Recommended for beginners.

Elegoo ABS-like 2.0: €22/liter, on par with Anycubic. Sub-€25/liter is a bargain.

For display/non-gaming minis: standard resin (Anycubic Standard, Elegoo Standard), €18-€22/liter, perfect for figures that won’t be handled.

Avoid: colored resins for minis (yellow, red), sustained UV exposure discolors them. Start with gray/black and paint later.

Optimal settings for minis

Layer height: 0.05 mm (50 µm) is standard. For competition-level precision drop to 0.025 mm: very slow (5-6 sec/layer on 8K) but detail is incredible.

Exposure time: start with manufacturer recommendation (typically 2.5-3.5 sec on 8K). Calibrate with RERF print.

Orientation: most important factor for mini quality. Heroic angle (model tilted 45° forward + 30° sideways) minimizes support marks on face/details. Lychee Slicer has auto-orient optimized for miniatures.

Supports: medium density, contact tip 0.30-0.40 mm. Manual placement on 90% of foot anchors: auto-supports miss critical overhangs. Recommend 4-5 minutes per mini for manual placement.

Hollowing: hollow your mini with 2 mm walls + drainage holes to save 50-70% resin. Lychee and ChiTuBox have auto-hollow.

Post-processing and painting

Wash: 2 minutes in IPA 99%, then another 2 minutes in fresh IPA. Double bath removes residual resin better. Wash & cure stations (Anycubic, Elegoo Mercury) automate the process.

Dry: 10-15 minutes air or with compressor. Never cure wet!

Cure: 4-6 minutes per side under 405 nm lamp. Over-curing makes resin brittle, for minis less is more.

Support removal: with sharp clippers (Tamiya, Xuron) while part is dry but not yet fully cured. Tiny witness marks covered with thin coat of Vallejo Surface Primer.

Priming: Vallejo Surface Primer (Black or Grey) airbrush, 2 thin coats. Without primer, paint won’t adhere.

Painting: Citadel Contrast (quick shading), Vallejo Game Color (details), Army Painter Speedpaint (hybrid). Citadel Contrast recommended for beginners: single coat gives finished texture.

Sealing: Army Painter Anti-Shine Matt Varnish after painting for UV resistance + scratch protection.

Frequently Asked Questions (FAQ)

Q: Can I print Warhammer minis without infringing copyright?
A:
GW (Games Workshop) has a strict policy against printing their models. STL files of GW minis are illegal to distribute. But there’s a huge legal market: MyMiniFactory, Cults3D, Patreon artists (Loot Studios, Artisan Guild, EC3D, Titan Forge), tens of thousands of original minis for €5-€20/month subscription. Recommend legal sources.
Q: How many minis per plate?
A:
On Anycubic Mono M5s (200×120 mm) you can pack 8-12 standard 28-32 mm minis tight. On Saturn 3 Ultra (218×123 mm): 12-18. On Sonic Mega 8K S (330×185 mm): 30-50. Print time stays ~30-60 minutes regardless of count.
Q: Cost of 1 miniature?
A:
Small 28 mm miniature: ~€0.30-€0.50 (resin €0.10, IPA €0.05, electricity €0.02, depreciation €0.20). Large 75 mm: €1-€2. Compared to GW retail €15-€25 per single miniature: 3D printing is 5-30x cheaper.
Q: Is resin dangerous for children?
A:
Yes. Standard resin is a sensitizer and UV-toxic in liquid form. Printing, post-processing, and handling UNTIL full cure MUST happen in a separate room, with gloves, glasses, and no access for children under 14. After full cure (5 min UV) resin is inert and safe. But we don’t recommend printing in a room with small children.

Interactive Analyzer for 3D Printing For Miniatures And Figurines, Complete Guide

Select a profile to view detailed analysis.

Strength / Durability 66%
Print Speed 78%

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).