In 2025–2026, coaxial powder feeding remains the heart of laser DED systems, determining powder catchment efficiency, melt pool quality, and deposit geometry. This article examines the engineering of coaxial nozzles, from concentric ring designs to multi-material powder switching.
Coaxial Nozzle Architecture
- Central Channel: Shielding gas (argon) delivers the laser beam.
- Powder Channel (Coaxial): Annular powder flow (30–150 μm particles) in carrier gas forms a cone focusing at the laser focal point.
- Outer Shielding Gas: Additional argon protects the melt pool from oxidation.
Key Parameter: Powder Catchment Efficiency (PCE), percentage of powder entering the melt pool. Typically 40–70% at optimal settings.
Interactive Filament Selector
Answer 3 quick questions and find the optimal material for your project.
1. What are the mechanical requirements for the part?
2. What temperature will the part operate at?
3. Are there any specific environmental requirements?
Our recommendation:
PLA filament
Ideal for easy printing, model visualization and decorative parts.
Nozzle Types
| Type | Description | PCE | Application |
|---|---|---|---|
| Discrete 3/4-port | 3–4 separate ports | 30–50% | Simple, low-cost |
| Continuous annular | 360° ring flow | 50–70% | Standard industrial |
| Internal feed | Powder fed inside laser beam | 60–80% | High efficiency |
| Dual focus | Separate powder + laser foci | 65–85% | R&D, multi-material |
Pros and Cons
Pros:
- Direction Independence: Coaxial works equally in all directions (unlike lateral feeding).
- High PCE: Up to 85% with optimized designs.
- Multi-Material: Powder switching enables functionally graded materials (FGM).
Cons:
- Complex Design: Precision gas-dynamic engineering required.
- Powder Loss: 15–60% of powder misses the melt pool.
- Setup Sensitivity: Small changes in gas flow dramatically affect quality.
FAQ
Coaxial Powder Feeding In Laser Ded: The Engineering Of Precision Calculator
Interactive optimization calculator.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert
