Skip to content Skip to content
EduFacturing
Tech

HP MJF Optimizations 2025–2026: New Materials and Process Control

HP MJF Optimizations 2025–2026: New Materials and Process Control

In 2025–2026, HP Multi Jet Fusion (MJF) optimizations continue to push polymer additive manufacturing toward true mass production. With 3,000+ machines installed globally, MJF is a mature platform that engineers continuously optimize for better properties, lower costs, and new materials.


MJF Process Summary

  1. Powder Layer: PA12 (or other polymer) deposited at ~80 μm layer height.
  2. Fusing Agent (FA): Inkjet heads spray IR-absorbing agent on fusion zones.
  3. Detailing Agent (DA): Inhibiting agent sprayed on contours for resolution.
  4. IR Lamp: Powerful IR lamp passes over the bed, FA zones absorb and fuse.
  5. Repeat layer by layer.

Interactive Filament Selector

Answer 3 quick questions and find the optimal material for your project.

1. What are the mechanical requirements for the part?


2025–2026 Optimizations

1. New Materials

Material Key Advantage Status
PA12 Balanced properties standard Mature
PA12 GB Higher modulus, dimensional stability Mature
PA11 Impact resistance, bio-based Mature
PP Chemical resistance, low cost Growing
TPU Flexibility, elasticity Growing
PA12 White Color dyeing without primer New

2. Nesting Optimization

HP SmartStream 3D Build Manager optimizes placement of hundreds of parts for maximum packing density (> 10%).

3. Surface Treatments

  • Vapor Smoothing (AMT PostPro): Ra 8–12 μm → 1–2 μm.
  • DyeMansion PowerShot: Automated coloring and polishing.

Pros and Cons

Pros:

  • Mass Production: Hundreds of parts per build in hours.
  • No Supports: Unprocessed powder supports parts.
  • Good Mechanical Properties: PA12 MJF ≈ injection-molded PA12.

Cons:

  • Closed Ecosystem: HP controls materials and consumables.
  • Roughness: Ra 8–12 μm without post-processing.
  • Powder Management: Requires industrial infrastructure.

FAQ

Q: Is MJF faster than SLS?
A:
For serial production: yes, significantly. MJF processes the entire cross-section simultaneously (IR lamp) while SLS scans with a point laser.
Q: What does an MJF part cost?
A:
Typically €0.10–0.30 per cm³ for PA12 at optimal packing density (> 8%).

Hp Mjf Optimizations 2025–2026: New Materials And Process Control Calculator

Interactive optimization calculator.

Optimal Value
0.00

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).