In 2025–2026, Fused Granulate Fabrication (FGF) or pellet extrusion has scaled FDM from desktop prototypes to industrial molds and tooling measured in meters. Instead of filament, FGF uses standard injection molding pellets: the same raw material injection presses consume. Result: 10–50× lower feedstock cost and deposition rates up to 50–100 kg/hr.
Why Pellets Instead of Filament?
| Parameter | Filament (FDM) | Pellets (FGF) |
|---|---|---|
| Feedstock Cost | €20–80/kg | €2–15/kg |
| Deposition Rate | 0.01–0.1 kg/hr | 5–100 kg/hr |
| Part Size | Up to ~500 mm | Up to 5+ meters |
| Materials | Limited selection | Thousands of injection grades |
Interactive Filament Selector
Answer 3 quick questions and find the optimal material for your project.
1. What are the mechanical requirements for the part?
2. What temperature will the part operate at?
3. Are there any specific environmental requirements?
Our recommendation:
PLA filament
Ideal for easy printing, model visualization and decorative parts.
Leading FGF Platforms
| Manufacturer | Platform | Build Volume | Speed |
|---|---|---|---|
| Thermwood | LSAM | 3×6×1.5 m | Up to 225 kg/hr |
| Ingersoll | MasterPrint | 7×3×1.5 m | Up to 68 kg/hr |
| CEAD | CFAM Prime | 4×2×1.5 m | Up to 15 kg/hr |
| Caracol | Heron AM | Robot-based | Up to 12 kg/hr |
| Cincinnati Inc. | BAAM | 1.8×1.8×1.8 m | Up to 45 kg/hr |
Pros and Cons
Pros:
- Scale: Multi-meter parts impossible for standard FDM.
- Dramatically Lower Cost: 10–50× cheaper than filament.
- Vast Material Selection: Any injection molding grade is a potential material.
- High Speed: Tens of kg/hr.
Cons:
- Low Resolution: Minimum wall thickness ~3–5 mm.
- Mandatory CNC Post-Processing: For all precision surfaces.
- Thermal Management: Large parts accumulate significant residual stresses.
FAQ
Fgf Pellet Extrusion: Meter-Scale Molds From Injection Pellets Calculator
Interactive optimization calculator.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert
