Skip to content Skip to content
EduFacturing

3D printing service. What is your part for?

Pick the job it has to do. We choose the material, the layer direction and the infill (how solid the inside is) by engineering rules.

Online 3D printing on demand with an instant price: upload your STL file and see what it costs before you order. Our print farm in Plovdiv prints in PLA, PETG and TPU, and we ship within Bulgaria.

A dark PETG-CF bracket on a wall. The layers run along the upright and the arm; a weight presses the end of the arm and the bracket holds.
An orange PETG bracket on a wall with horizontal layers, for parts that live outdoors.
A blue TPU bracket on a wall. A weight presses the end of the arm; it bends and springs back.
A light PLA bracket on a wall with very fine layers and a smooth surface.

Holds a load

Lives outdoors

Bends and springs back

Fine detail

How it sits in the printer

lying on its side

The bracket lies on its side on the print bed; the nozzle builds horizontal layers, each holding the whole profile.

upright, as it will stand

The bracket stands upright on the print bed; the nozzle builds horizontal layers from the bottom up.

upright, as it will stand

The bracket stands upright on the print bed; the nozzle builds horizontal layers from the bottom up.

upright, as it will stand

The bracket stands upright on the print bed; the nozzle builds horizontal layers from the bottom up.
What the part is for

PETG-CF is stiffer. We place the part in the printer so the load pulls along the layers, not between them, and make the infill denser.

Material
PETG-CF
Layer
0.2 mm
Infill
40%
Weight each
8.7 g

Example: 5 pieces of 11.5 cm³, without supports93.65 EUR18.73 EUR each

PETG takes knocks and moisture better than PLA. For parts that live outdoors.

Material
PETG
Layer
0.2 mm
Infill
25%
Weight each
6.9 g

Example: 5 pieces of 11.5 cm³, without supports60.00 EUR12.00 EUR eachThe total is raised to the minimum order.

TPU 95A bends like rubber and springs back. For seals, bumpers and soft covers.

Material
TPU 95A
Layer
0.2 mm
Infill
20%
Weight each
6.1 g

Example: 5 pieces of 11.5 cm³, without supports60.00 EUR12.00 EUR eachThe total is raised to the minimum order.

PLA with 0.12 mm layers: finer layers and a smoother surface for parts seen up close.

Material
PLA
Layer
0.12 mm
Infill
20%
Weight each
6.3 g

Example: 5 pieces of 11.5 cm³, without supports60.00 EUR12.00 EUR eachThe total is raised to the minimum order.

From 1.20 EUR per gram, minimum order 60 EUR

Formats: STL, OBJ, 3MF, PLY, OFF, GLB, AMF or DAE. STEP (.step, .stp) is not uploaded here: it opens directly in the app, where it is converted in your browser.

No file yet? Get a 3D design madeFind a ready-made model

An engineer measures every part before it ships to you. If it is not right, we make it again.

We ship, and take paid orders, within Bulgaria only. In another country? Send an inquiry.

+359 87 640 8337

5.0 from 62 reviews on the whole Google profile of the company3D printing service: Plovdiv, we ship within BulgariaYou see the price before you order.

Same material. Same part.

A printer always builds horizontal layers. We decide how the part lies so the load does not pull the layers apart.

The bracket upright on the print bed; the layers are horizontal.in the printerThe same bracket on the wall with a weight on the arm. The layers run across the load and split above the corner.on the wall
As it comes: upright18 MPathe load pulls the layers apart and they split above the corner
The bracket on its side on the print bed; each layer holds the whole profile.in the printerThe same bracket on the wall with a weight on the arm. The layers run along the upright and the arm, and it holds.on the wall
For the job: on its side47 MPaeach layer holds the whole profile and the load pulls along the layers

PETG, Prusament PETG technical data sheet v1.1: 47 MPa is the tensile strength along the layers (ISO 527-1), 18 MPa is the adhesion between layers (Prusa Polymers method).

How much does 3D printing cost

The price of 3D printing is worked out from the grams of material in your part. Our calculator does the sums from the file itself; here are the prices and three worked examples.

What the price covers

  • Checking the file

    We measure the model and look for problems before we show you a price.

  • Repair

    We merge duplicate vertices and remove zero-area (degenerate) triangles.

  • Orientation and supports

    The check suggests how the part should lie on the print bed and estimates the supports for that position. Supports are included in the price if the check finishes in time; otherwise the price is without supports.

  • Printing

    The price depends on the material, the weight of the part (with supports), the infill (how solid the inside is), the layer height and the quantity. Below the minimum order the amount is raised to 60 EUR.

  • Tracking

    After payment you get a link where you can follow your order.

  • Invoice

    We issue an invoice to a person or to a company.

Prices for 3D printing
MaterialWhat it is forPrice per gram
PLAAn all-round material for models and decorative parts1.20 EUR
PETGTougher and more moisture resistant, for functional parts1.32 EUR
TPU 95AFlexible like rubber, for seals and soft covers1.92 EUR
PETG-CFCarbon fiber filled, for stiffer parts under load2.40 EUR
Layer height
Draft (0.28 mm)15% lower price
Standard (0.20 mm)Base price
Fine (0.12 mm)40% higher price
Quantity discount
From 5 pieces10% off
From 20 pieces20% off
From 50 pieces30% off
Order
Minimum order60 EUR

Prices are final.

Three example models, priced for PLA at the current prices

Worked out by the same function that prices real orders: PLA, Standard (0.20 mm) layer height, 15% infill, without supports (there is no file to check). Change the material or the quantity and the prices are worked out again.

ModelVolumeWeight eachTotal, quantity 1Total, quantity 5Total, quantity 20Total, quantity 50
Cube 20 × 20 × 20 mm8 cm³4 g60.00 EURminimum order60.00 EURminimum order12.00 EUR each77.20 EUR3.86 EUR each169.00 EUR3.38 EUR each
Gear 44 × 44 × 10 mm11.8 cm³5.9 g60.00 EURminimum order60.00 EURminimum order12.00 EUR each113.40 EUR5.67 EUR each248.00 EUR4.96 EUR each
T-shaped beam 60 × 10 × 19 mm3.9 cm³2 g60.00 EURminimum order60.00 EURminimum order12.00 EUR each60.00 EURminimum order3.00 EUR each82.50 EUR1.65 EUR each

What we check for you

The check starts as soon as the file is uploaded. The check shows what it found.

  • What we measure

    The size and volume of the model, whether it is watertight, whether it has open edges or zero-area triangles, how many separate bodies it has and whether the dimensions look like millimeters.

  • What we repair ourselves

    We merge duplicate vertices and remove zero-area triangles.

  • What we do not repair

    We do not close holes in a model or flip normals. If any are left, we show you, so you can fix the model in the software you made it in or contact us. No one to fix it? See our 3D design service

  • Orientation and supports

    The check suggests a position for the part on the print bed and estimates the supports it will need in that position. Supports are included in the price if the check finishes in time; otherwise the price is without supports.

  • What you get

    Size, weight, price and warnings about places that are hard to print.

Materials

Which one you pick depends on what the part has to do.

  • PLA

    Fine detail

    An all-round material for models and decorative parts.

    Colors: black, white, gray and orange.

    1.20 EUR per gram
  • PETG

    Outdoors

    Tougher and more moisture resistant, for functional parts.

    Colors: black and transparent.

    1.32 EUR per gram
  • TPU 95A

    Flexible

    Flexible like rubber, for seals and soft covers.

    Colors: black.

    1.92 EUR per gram
  • PETG-CF

    Load

    Carbon fiber filled, for stiffer parts under load.

    Colors: black.

    2.40 EUR per gram

Compare the materials Material properties

Three hexagonal PLA cups shading from coral to yellow, holding pencils, scissors and tape, on a wooden desk
A black printed PETG-CF bracket with a diagonal gusset holds an oak shelf with plant pots and a cast iron pot; the layers show along the bracket

Technologies

Our machines print with FDM, with an instant price. SLA and SLS are quoted on request, and metal is by inquiry only.

TechnologyHow it worksHow to order
FDM (filament)Plastic filament is melted and the part is built layer by layer. It suits models, jigs and functional parts.Instant price: upload your file and see it. Upload your file
SLA (resin)Light cures liquid resin layer by layer. It gives a smooth surface and fine detail.Quoted on request: send us your model or idea and we reply within one working day. Ask for a quote
SLS (powder)A laser fuses powder. It needs no supports because the powder holds the part.Quoted on request: send us your model or idea and we reply within one working day. Ask for a quote
Metal (DMLS, SLM)A laser melts metal powder layer by layer to make strong metal parts.By inquiry only. Send an inquiry

Compare the technologies

Our machines

Our print farm in Plovdiv runs 31 machines. Every order goes to the machine that suits the part: FDM for everyday parts, resin for fine detail and laser sintering for nylon without supports.

  • The Bambu Lab P1P printer with its open frame and a tool pegboard on the side, manufacturer photo
    Photo: Bambu Lab

    FDM

    Bambu Lab P1P

    10 units

    The workhorses of our print farm. Most PLA, PETG and TPU orders run here, from a single part to a batch.

    Build volume
    256 × 256 × 256 mm
    Speed
    up to 500 mm/s
    Nozzle
    up to 300 °C
    Bed
    up to 100 °C
  • The Bambu Lab A1 mini printer on a light background, manufacturer photo
    Photo: Bambu Lab

    FDM

    Bambu Lab A1 mini

    10 units

    Compact printers for small parts and quantities that run in parallel. They calibrate themselves before every print.

    Build volume
    180 × 180 × 180 mm
    Speed
    up to 500 mm/s
    Nozzle
    up to 300 °C
    Bed
    up to 80 °C
  • The Bambu Lab H2C printer with its enclosed chamber and a filament unit on top, manufacturer photo
    Photo: Bambu Lab

    FDM

    Bambu Lab H2C

    5 units

    A heated, enclosed chamber for engineering materials and larger parts. The Vortek system swaps between up to six hotends on its own, so a multi-material part prints without wasted purge.

    Build volume
    305 × 320 × 325 mm
    Nozzle
    up to 350 °C
    Bed
    up to 120 °C
    Chamber
    up to 65 °C
  • The Formlabs Form 4 printer with its orange cover and front screen, manufacturer photo
    Photo: Formlabs

    SLA

    Formlabs Form 4

    5 units

    Resin for fine detail: a smooth surface and precise small features that FDM cannot give. SLA orders are quoted on request.

    Build volume
    200 × 125 × 210 mm
    XY resolution
    50 µm
    Layer
    25 to 200 µm
    Vertical speed
    up to 100 mm/h
  • The Formlabs Fuse X1 printer with its screen and status light on top, frame from the manufacturer video
    Photo: Formlabs

    SLS

    Formlabs Fuse X1

    1 unit

    A laser sinters nylon powder layer by layer. Parts need no supports, so complex shapes and batches fill the whole build volume. SLS orders are quoted on request.

    Build volume
    330 × 330 × 565 mm
    Laser
    120 W
    Layer
    110 µm
    Laser spot
    330 µm

How an order works

  1. File

    You drop your 3D model into the app.

  2. Check

    We check it and repair what can be repaired.

  3. Price

    You choose material, color, quality and quantity and see the price at once.

  4. Order and payment

    Your order is added to the cart and you pay there. Payment and delivery are available in Bulgaria only.

  5. Tracking

    After payment you get a link where you can follow your order.

Upload your file

Your order's path through the print farm

From the request on the screen to the box at your door: every order goes this way.

  1. The client's request on the reception screen
    1The request arrives
  2. Checking the model in the slicer
    2Model check in the slicer
  3. Scheduling the jobs across the machines
    3Scheduling across the machines
  4. 3D printing the part
    43D printing
  5. Removing the finished part from the plate
    5Removing from the plate
  6. Washing an SLA part after printing
    6Washing the SLA parts
  7. Sifting SLS parts out of the powder
    7Sifting the SLS parts
  8. Dimensional check before packing
    8Dimensional check
  9. Packing the order
    9Packing
  10. Handing the parcel to the courier
    10Handing over to the courier
  11. The client receives the order
    11At your door

Lead time and delivery

Lead time

The lead time depends on the size of the part and how busy the farm is. We usually ship within 7 days of payment.

Delivery

  • Econt to an office or to an address.

  • Pick-up in Plovdiv.

  • Paid orders and delivery are for Bulgaria only. If you are in another country, send us an inquiry. Send an inquiry

For companies

3D printing services for companies: single parts and batches, with an invoice.

  • Invoice

    We issue an invoice to a company. Email us the invoice details and we will issue it with your order.

  • Quote as a PDF

    You can download the quote as a PDF in the app, with your company details.

  • Batch orders

    • From 5 pieces: 10% off
    • From 20 pieces: 20% off
    • From 50 pieces: 30% off
  • Repeat order

    Upload the same file again and the price is recalculated at current prices. For regular work on the same part, contact us.

Contacts

A batch of identical orange printed parts with white inserts in rows on a white workbench
How much does 3D printing cost?

You pay for the grams of material that go into your part, so the price is different for every file. The price per gram is: PLA 1.20 EUR, PETG 1.32 EUR, TPU 95A 1.92 EUR and PETG-CF 2.40 EUR. You upload the file and see the price right away, before you order. The minimum order is 60 EUR.

What affects the price?

The material, the weight of the part and how dense the infill is. Supports that hold up overhanging parts add material too. Layer height and quantity change the price as well. Layer height: Draft (0.28 mm) 15% lower price and Fine (0.12 mm) 40% higher price. Quantity discount: from 5 pieces 10%, from 20 pieces 20%, from 50 pieces 30%. The minimum order is 60 EUR.

How does the calculator work out the price from my file?

The calculator measures the volume of the model from the file itself and works out the weight in grams from it: the walls and the covering layers, plus the infill you choose. Supports are added to the weight if the part needs them; their weight is an estimate, not a slice of the model. The grams are multiplied by the price per gram of the material and by the factor for the layer height. Then the quantity and the quantity discount are applied. An amount under 60 EUR is raised to 60 EUR. Prices are final.

Which file do I need?

You need a 3D model in STL, OBJ, 3MF, PLY, OFF, GLB, AMF or DAE format. The file can be up to 50 MB. STEP (.step, .stp) is not uploaded from this page: it opens directly in the app, where it is converted in your browser. If your model is in another format, contact us.

Who can see my file, and for how long is it available?

The file is saved on our server, in a folder that cannot be opened from outside. Only you can see it, from the browser or account you uploaded it with, and the site administrators. It stays available to you for 7 days from the upload: after that the app says the file has expired and you upload it again.

How long does it take?

The lead time depends on the size of the part and how busy the farm is. We usually ship within 7 days of payment. When the print farm feeds in fresh data, the app also shows a ready-by date for your file.

Which materials are available?

We print with FDM technology. PLA: an all-round material for models and decorative parts, 1.20 EUR per gram. PETG: tougher and more moisture resistant, for functional parts, 1.32 EUR per gram. TPU 95A: flexible like rubber, for seals and soft covers, 1.92 EUR per gram. PETG-CF: carbon fiber filled, for stiffer parts under load, 2.40 EUR per gram.

How do I get my order?

We ship with Econt to an office or to an address, in Bulgaria only. You can also collect your order in Plovdiv. If you are in another country, send us an inquiry and we will see what is possible.

Do I need an account to order?

No. From the calculator you go to the cart and pay there as a guest, without an account. Paid orders and delivery are for Bulgaria only; from another country, send us an inquiry.

Can I get an invoice?

Yes, we issue an invoice to a person or to a company. Email us the invoice details and we will issue it with your order. Prices are final.

What if I do not have a 3D model?

If you have an idea, a sketch or a photo, see our 3D design service: we build the 3D model from it and print it once it is ready. If you have a part with no drawings, there is also reverse engineering: we measure it and build the model.

What if my file is broken?

We check every file when you upload it. We repair what can be fixed automatically: we merge duplicate vertices and remove zero-area triangles. We do not close holes in the model ourselves. If any are left, we show them to you, so you can fix the model or contact us.

What does the score out of 100 mean in the model check?

The check compares the model with rules for FDM printing and gives it a score out of 100. Next to it we show what the check found: thin walls, overhangs, a long and thin part, several separate bodies, units that are not millimeters, or a model that is not closed. The estimate follows rules; it is not a guarantee. Supports are included in the price if the check finishes in time; otherwise the price is without supports.

Can you do SLA or SLS?

Yes, as a custom quote. SLA uses resin and gives a smooth surface, while SLS uses powder and needs no supports. Send us your model or idea and we reply within one working day.

3D printing handbook

A short guide to the technologies, the materials and the price.

3D printing technologies

FDM (fused deposition modeling) builds the part layer by layer from melted plastic filament. It suits models, jigs and functional parts, and it is the technology behind our instant prices.

SLA and LCD (photopolymer resin): light cures liquid resin. It gives a smooth surface and fine detail, so it suits small, detailed models.

SLS (selective laser sintering): a laser fuses powder, usually nylon. The parts are strong and need no supports.

Metal parts (DMLS and SLM): a laser melts metal powder layer by layer. They are made by inquiry.

Compare the technologies

Materials

PLA is an easy material for models, decoration and light-duty parts. PETG is tougher and tolerates moisture, so it suits functional parts. ABS is strong and heat resistant but harder to print. ASA is like ABS and resists UV and weather, so it suits parts used outdoors.

TPU is flexible like rubber: for seals, covers and soft parts. Nylon is strong and wear resistant: for gears, hinges and bushings. Composites contain carbon or glass fiber and make the part stiffer. Resins are for fine, smooth parts, and metals are for strong parts.

At the print farm we print the materials in the price table; the others are described for comparison.

Compare the materials Material properties

What the price depends on

The price of 3D printing depends on the material (how many grams and at what price per gram), the weight of the part including supports, the infill, the layer height and the quantity. Large and dense parts are charged by weight. Below the minimum order the amount is raised to 60 EUR, so small parts often end up at the minimum.

How to order

You drop the file into the box at the top of the page, we check it and you see the price. If you are in Plovdiv you can collect the order in person. No model? We build one from an idea, a sketch or a photo.

3D design FDM for beginners

For AI assistants and programs

You can get a price from a volume alone, without a file, with one request:

https://edufacturing.com/wp-json/ef/v1/printirane/cena?volume_cm3=8&material=pla&quality=standard&infill_pct=20&qty=1

The reply contains the weight in grams, an estimate of the hours, the price in euro and an order link. Supports are not included because there is no file to check. Prices are final.

For this request the reply is: weight 4.4 g, time estimate: 0.4 hours, price 60 EUR. The minimum order applies here.

Our rating on Google

5.0 from 62 reviews. The figure is for the whole company profile on Google, not only for this service.

See the reviews on Google

Have a file? See the price

Drop it into the app and see the price before you order.

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).