zav base printer – Спецификации и настройки

Спецификации

• Производител: Zav Co., Ltd.
• Технология: FDM
• Клас: experimenter

Чести проблеми и решения

Stringing

• Description: Thin, web-like threads forming between different parts of the print due to moisture or improper retraction. Решение:: Dry filament for 4-6 hours at 50°C for PLA or 70°C for Nylon. Increase retraction distance by 1-2 mm, reduce nozzle temperature by 5°C, and increase travel speed to 200 mm/s.

Warping

• Description: Corners or edges of the print lifting from the build platform due to uneven cooling and residual thermal stress. Решение:: Increase bed temperature by 5°C, add a 5-10 mm brim, use a heated enclosure, and apply an adhesive like a glue stick.

Under-extrusion

• Description: Thin, fragile walls and structural gaps appearing on the print surface due to a partially clogged nozzle or incorrect E-steps. Решение:: Perform 3-5 cold pulls with Nylon, calibrate E-steps using the M92 command, and check extruder gear tension.

Подходящи приложения

• Jigs and Fixtures (Automotive):: Manufacturing specialized production templates and tools subjected to heavy mechanical loads, often requiring strength over 100 MPa.
• Consumer Electronics Housings (Consumer Electronics):: Production of smooth exterior plastic housings for smart devices, requiring high resolution and minimal post-processing.
• Certified Components (Aerospace):: Printing critical functional components requiring extreme temperature resistance and high tensile strength using materials like PEI (ULTEM).