Tevo Tarantula Pro – Спецификации и настройки

Спецификации

• Производител: Tevo
• Технология: FDM
• Клас: experimenter

Чести проблеми и решения

Stringing

Thin plastic threads resembling a spider web between printed parts due to wet filament or insufficient retraction. Решение: Dry the filament for 4-6 hours at appropriate temperatures and increase the retraction distance by 1-2 mm.

Layer Shift

Horizontal displacement of the upper layers caused by loose belts or skipped motor steps during rapid movements. Решение: Tighten the drive belts across the X and Y axes, check the grub screws on the pulleys, and reduce printing speed.

Elephant’s Foot

The bottom layer of the print is expanded outwards due to being squeezed too closely to the heated bed. Решение: Increase the Z-offset by +0.05 mm, lower the bed temperature by 5°C for the first layer, or apply a slicer compensation of 0.1-0.2 mm.

Подходящи приложения

• Rapid Prototyping (Product Design): Creating quick visual and dimensional prototypes to verify form, fit, and ergonomics within hours.
• Jigs and Fixtures (Manufacturing): Manufacturing custom tools, alignment guides, and workholding devices in small batches of 1 to 100 units.
• STEM Models (Education): Producing educational physical models and mechanical parts to teach basic engineering and 3D printing principles.