sovol-sv02 legacy – Спецификации и настройки

Спецификации

• Производител: Sovol 3D
• Технология: FDM
• Клас: experimenter

Чести проблеми и решения

Stringing

Thin, web-like plastic strands between different parts of the printed model, often caused by wet filament or insufficient retraction. Решение: Dry the filament for 4-6 hours (e.g., 50°C for PLA), increase retraction distance by 1-2 mm, and decrease the nozzle temperature by 5°C.

Warping

The corners or edges of the print detach from the build plate and curl upwards due to rapid, uneven cooling and thermal stress. Решение: Increase the bed temperature by 5°C, add a 5-10 mm Brim to the slicer settings, and apply bed adhesives like a glue stick.

Under-extrusion

The printer extrudes less plastic than required, resulting in thin, fragile walls and structural gaps. Решение: Perform a cold pull to clear partial nozzle clogs, calibrate the extruder E-steps, and slightly increase the nozzle temperature by 5°C.