Genius Pro – Спецификации и настройки

Genius Pro е hobby FDM 3D принтер от Artillery.

Спецификации

• Производител: Artillery
• Технология: FDM
• Клас: hobby
• Ориентировъчна цена: ~249 EUR
• Работен обем: 220 x 220 x 250 mm

Чести проблеми и решения

Stringing

Thin web-like threads forming between parts of the print, typically caused by moisture absorbed by the filament or inadequate retraction settings. Решение: Dry the filament for 4-6 hours at 50°C for PLA or 70°C for Nylon/PETG. Increase the retraction distance by 1-2 mm, lower the nozzle temperature by 5°C, and increase travel speed to 200 mm/s.

Warping

Corners or edges of the print detach from the build platform and curl upwards due to thermal residual stress from rapid, uneven cooling. Решение: Increase the bed temperature by 5°C, add a 5-10 mm brim in the slicer, apply a layer of glue stick or use a PEI sheet, and reduce the part cooling fan speed to 30% for the first 5 layers.

Under-extrusion or Clogging

The printer extrudes insufficient plastic or stops extruding entirely, resulting in brittle walls, gaps, or failed prints, often due to heat creep or debris in the nozzle. Решение: Perform 3 to 5 consecutive ‘cold pull’ procedures to clear the nozzle. Check the heat break cooling fan, verify the PTFE tube condition in the direct drive assembly, and calibrate E-steps (M92).

Подходящи приложения

• Rapid Prototyping: Quickly printing CAD designs to verify form, fit, and ergonomic feel within hours before proceeding to expensive manufacturing methods.
• Custom Jigs and Fixtures: Producing low-volume, highly specific mechanical templates and holding tools capable of withstanding functional loads.
• Educational Models: Creating physical representations of complex concepts, mechanical parts, and student-designed models from idea to object.