Trident 300 – Спецификации и настройки

Trident 300 е prosumer FDM 3D принтер от Voron Design.

Спецификации

• Производител: Voron Design
• Технология: FDM
• Клас: prosumer
• Ориентировъчна цена: ~999 EUR
• Работен обем: 300 x 300 x 300 mm

Чести проблеми и решения

Stringing

Thin, web-like strands of plastic between separate parts of the model, usually caused by wet filament or insufficient retraction. Решение: Dry the filament for 4-6 hours at the recommended temperature (e.g., 50°C for PLA, 70°C for Nylon), increase retraction distance by 1-2 mm, and increase travel speed.

Ghosting / Ringing

Wavy, repeating lines echoing around corners or features, caused by mechanical vibrations when the print head changes direction rapidly at high speeds. Решение: Tighten the CoreXY drive belts, reduce print acceleration, and configure resonance compensation (Input Shaper) in the Klipper firmware.

Layer Shift

Sudden horizontal displacement of the upper layers compared to the lower layers, ruining the object’s geometry. Решение: Check and tighten all CoreXY belts, ensure stepper motor grub screws are secure, verify linear rails are lubricated, and ensure motors are not skipping steps due to excessive speeds.

Подходящи приложения

• Automotive Jigs and Fixtures: Manufacturing specialized, high-strength production templates and assembly tools capable of withstanding heavy mechanical loads using CF-Nylon.
• Functional Enclosures and Housings: Producing durable, heat-resistant electronic housings using ABS or ASA, leveraging the printer’s enclosed chamber to prevent warping and delamination.
• Rapid Prototyping: Quickly iterating designs for mechanical parts to perform fit-checks and ergonomic testing before mass production.