TinyBoy E10/J10/L10/M10 – Спецификации и настройки

Спецификации

• Производител: TinyBoy
• Технология: FDM
• Клас: experimenter

Чести проблеми и решения

Stringing

Thin, web-like plastic strands forming between separate parts of the print due to wet filament or insufficient retraction [1]. Решение: Dry the filament for 4-6 hours at 50°C for PLA, increase retraction distance by 1-2 mm, and lower the nozzle temperature by 5°C [2].

Warping

The corners or edges of the printed part lift and detach from the build plate due to rapid, uneven cooling and internal thermal stress [2]. Решение: Increase the bed temperature by 5°C, add a 5-10 mm brim, use a heated enclosure, and apply a bed adhesive like a glue stick [3].

Elephant’s foot

The base layer of the 3D print is squished and expands outwards beyond the intended CAD dimensions [4]. Решение: Raise the Z-offset by 0.05 mm, decrease the initial layer bed temperature by 5°C, and apply a software compensation of 0.1-0.2 mm [4].

Подходящи приложения

• STEM Educational Modeling (Education): Utilizing small-form-factor desktop printers to teach students the fundamentals of CAD design and additive manufacturing from idea to object [5, 6].
• Rapid Prototyping (Product Design): Quickly producing low-cost physical models to test form, ergonomic fit, and spatial volume before committing to expensive tooling [5, 7].