Към съдържанието Към съдържанието
EduFacturing
Новини

Prusa MK4 Technical Review & Handbook – Спецификации и настройки

Prusa MK4 Technical Review & Handbook – Спецификации и настройки

Prusa MK4 Technical Review & Handbook

The Prusa MK4 represents a significant evolution in prosumer Fused Deposition Modeling (FDM) technology. Engineered by Prusa Research, this machine builds upon a legacy of reliable open-source kinematics while introducing advanced loadcell-based bed leveling and a 32-bit connected architecture. The Nextruder technology ensures precision extrusion with planetary gears.

Спецификации

  • Производител: Prusa
  • Технология: FDM
  • Клас: prosumer

Чести проблеми и решения

Stringing

  • Description: Thin, web-like plastic strings appearing between printed parts due to oozing during travel moves. Решение: Dry the filament for 4-6 hours (50°C for PLA, 70°C for Nylon), increase retraction distance by 1-2 mm, decrease nozzle temperature by 5°C, and increase travel speed to 200 mm/s.

Warping

  • Description: Corners or edges of the print detach from the build plate and curl upwards due to uneven cooling and thermal shrinkage. Решение: Increase bed temperature by 5°C, use a 5-10 mm brim, apply an adhesive like a glue stick on the PEI sheet, and reduce part cooling fan speed to 30% for the first 5 layers.

Elephant’s foot

  • Description: The first layer of the print expands horizontally beyond the intended CAD dimensions because it is squished too hard against the heated bed. Решение: Raise the live Z-offset by +0.05 mm, decrease the bed temperature by 5°C specifically for the first layer, and apply a software Elephant foot compensation of 0.1-0.2 mm in PrusaSlicer.

Layer shift

  • Description: The upper layers of the print are suddenly shifted horizontally relative to the lower layers due to kinematic issues. Решение: Tighten the X/Y drive belts, reduce print speed by 20%, and check the grub screws on the stepper motor pulleys.

Подходящи приложения

  • Rapid Prototyping: * Description: Quickly producing physical models to verify form, fit, and ergonomics within hours.
  • Jigs and Fixtures: * Description: Creating custom manufacturing tools, templates, and fixtures capable of withstanding mechanical loads using tough materials like PC Blend, PETG, or CF-Nylon.
  • Low-volume Production: * Description: Manufacturing small batches (1-100 units) of custom functional parts or spare parts without the need for expensive injection molds.

Инженер, автор на „Голямата книга на 3D принтирането“ и експерт по адитивни технологии

Използваме бисквитки. Необходимите правят сайта да работи.

Искаш AI на Google да ти дава точни отговори за 3D принтиране? Добави EduFacturing като Предпочитан източник (отваря Google, добави „edufacturing.com“).