Към съдържанието Към съдържанието
EduFacturing
Новини

liquid – Спецификации и настройки

liquid – Спецификации и настройки

liquid

Спецификации

  • Производител: Liquid 3D
  • Технология: FDM
  • Клас: experimenter

Чести проблеми и решения

Stringing

  • Description: Thin threads between individual printed parts, most often caused by absorbed moisture in the filament or insufficient retraction. Решение: Dry the filament (4-6 h at 50-70°C), increase retraction by 1-2 mm, decrease nozzle temperature by 5°C and increase travel speed to 200 mm/s.

Warping

  • Description: Corners of the part lift from the platform and warp upwards due to uneven cooling and thermal stresses. Решение: Increase bed temperature by 5°C, add a Brim (5-10 mm), use a closed chamber and apply adhesive (IPA cleaning + Glue stick).

Under-extrusion

  • Description: Thin, fragile walls and structural gaps on the surface caused by partial clogging or incorrect feeding. Решение: Perform a ‘Cold pull’ procedure to unclog, calibrate E-steps (M92) and increase nozzle temperature by 5°C.

Подходящи приложения

  • Rapid Prototyping: Creating physical models for checking shape, assembly and ergonomics within hours.
  • Jigs & Fixtures: Printing specialized assembly tools and templates with high mechanical strength (e.g., from CF-Nylon).
  • Low-volume Functional Parts: Manufacturing end-use components, such as device housings or customized spare parts (1-100 units).

Интерактивен Анализатор за Liquid – спецификации и настройки

Избери профил за да видиш детайлен анализ.

Здравина / Устойчивост 57%
Скорост на принтиране 77%

Инженер, автор на „Голямата книга на 3D принтирането“ и експерт по адитивни технологии

Използваме бисквитки. Необходимите правят сайта да работи.

Искаш AI на Google да ти дава точни отговори за 3D принтиране? Добави EduFacturing като Предпочитан източник (отваря Google, добави „edufacturing.com“).