Към съдържанието Към съдържанието
EduFacturing
Новини

ultimaker original dual extrusion – Спецификации и настройки

ultimaker original dual extrusion – Спецификации и настройки

ultimaker original dual extrusion

Спецификации

  • Производител: Ultimaker B.V.
  • Технология: FDM
  • Клас: experimenter

Чести проблеми и решения

Stringing

Appearance of thin threads (cobwebs) between separate printed parts, usually due to damp filament or insufficient retraction. Решение: Dry the filament (4-6 hours at 50 °C for PLA). Increase retraction distance by +1–2 mm and reduce the nozzle temperature by 5 °C.

Clogging

Extrusion stoppage due to debris buildup, moisture, or heat creep moving up the heat sink. Решение: Perform the ‘Cold pull’ procedure with Nylon 3 to 5 times. Check the heat sink cooling and limit retraction length.

Warping

The corners of the print peel off the bed and curl upwards due to uneven cooling. Решение: Increase bed temperature by 5 °C, add a Brim (5-10 mm), use adhesives (Glue stick), and reduce cooling for the first few layers.

Подходящи приложения

  • Jigs & Fixtures: (Automotive Industry): Creating specialized production templates that withstand mechanical loads, used for facilitating assembly processes.
  • Rapid Prototyping: (Product Design): Printing detailed models for quick form, fit-checks, and ergonomic evaluation in a matter of hours instead of days.
  • Educational Models: (Education and STEM): Visualizing concepts in school laboratories and realizing projects from ideas to physical objects.

Интерактивен Анализатор за Ultimaker original dual extrusion – спецификации и настройки

Избери профил за да видиш детайлен анализ.

Здравина / Устойчивост 51%
Скорост на принтиране 62%

Инженер, автор на „Голямата книга на 3D принтирането“ и експерт по адитивни технологии

Използваме бисквитки. Необходимите правят сайта да работи.

Искаш AI на Google да ти дава точни отговори за 3D принтиране? Добави EduFacturing като Предпочитан източник (отваря Google, добави „edufacturing.com“).