Към съдържанието Към съдържанието
EduFacturing
Новини

ultimaker method base profile – Спецификации и настройки

ultimaker method base profile – Спецификации и настройки

ultimaker method base profile

Спецификации

  • Производител: Ultimaker B.V.
  • Технология: FDM
  • Клас: experimenter

Чести проблеми и решения

Stringing

Thin, web-like plastic strands appearing between separate parts of the print, primarily caused by hygroscopic filament absorbing moisture. Решение: Dry the filament for 4-6 hours (e.g., 50°C for PLA or 70°C for Nylon), increase retraction distance by 1-2 mm, reduce nozzle temperature by 5°C, and increase travel speed to 200 mm/s.

Warping

The corners or edges of the printed part lift off the build plate due to uneven thermal contraction and residual stress, especially common with engineering polymers. Решение: Keep the printer’s enclosure closed to maintain ambient temperature, increase the heated bed temperature by 5°C, add a 5-10 mm brim, and apply bed adhesives like Magigoo or a glue stick.

Under-extrusion

The appearance of thin, brittle walls and structural gaps in the model due to a partially clogged nozzle or incorrect extruder feeding rates. Решение: Perform a ‘Cold pull’ procedure to clear partial clogs, calibrate the extruder E-steps, and increase the nozzle temperature by 5°C.

Elephant’s Foot

The lowest layer of the print expands horizontally beyond the intended CAD dimensions because the first layer is squished too firmly against the heated bed. Решение: Increase the Z-offset by +0.05 mm, decrease the bed temperature by 5°C for the initial layer, and apply a software ‘Elephant foot compensation’ of 0.1-0.2 mm in the slicer.

Подходящи приложения

  • Jigs and Fixtures: (Automotive and Heavy Manufacturing): On-demand manufacturing of specialized alignment tools, manufacturing aids, and templates using strong engineering materials like CF-Nylon or PC.
  • Rapid Prototyping and Fit-checks: (Consumer Electronics and Product Design): Iterative printing of highly accurate models to validate form, ergonomic design, and mechanical assembly tolerances before mass production.
  • Complex End-Use Components: (Aerospace and Industrial Engineering): Leveraging dual extrusion capabilities to print complex, ready-to-use functional geometries using soluble support materials like PVA or HIPS.

Инженер, автор на „Голямата книга на 3D принтирането“ и експерт по адитивни технологии

Използваме бисквитки. Необходимите правят сайта да работи.

Искаш AI на Google да ти дава точни отговори за 3D принтиране? Добави EduFacturing като Предпочитан източник (отваря Google, добави „edufacturing.com“).