Към съдържанието Към съдържанието
EduFacturing
Новини

Centauri Carbon – Спецификации и настройки

Centauri Carbon – Спецификации и настройки

Centauri Carbon е budget FDM 3D принтер от Elegoo.

Спецификации

  • Производител: Elegoo
  • Технология: FDM
  • Клас: budget
  • Ориентировъчна цена: ~438 EUR
  • Работен обем: 256 x 256 x 256 mm

Чести проблеми и решения

Stringing

Thin, cobweb-like strands of plastic stretching between different parts of the printed model. Решение: Dry the filament for 4-6 hours (50°C for PLA, 70°C for Nylon), increase retraction distance by 1-2 mm, and decrease nozzle temperature by 5°C.

Warping

The corners or edges of the print curl upwards and detach from the build plate due to uneven thermal contraction. Решение: Increase the bed temperature by 5°C, add a 5-10 mm brim, apply an adhesive like glue stick, and keep the enclosure closed for materials like ABS or ASA.

Under-extrusion

The printed object has missing layers, thin walls, or structural gaps due to insufficient material flow. Решение: Perform 3-5 cold pulls to clear partial nozzle clogs, check extruder gear tension, and calibrate the E-steps (M92).

Elephant’s Foot

The base of the print bulges outwards, expanding slightly beyond the intended CAD dimensions. Решение: Raise the Z-offset by +0.05 mm, decrease the bed temperature by 5°C for the first layer, and set elephant foot compensation (0.1-0.2 mm) in the slicer.

Ghosting / Ringing

Repeating wavy lines or visual echoes appearing on the surfaces of the print, usually after sharp corners. Решение: Ensure belts are properly tensioned, lower print speeds to around 60 mm/s, and calibrate Input Shaper and Pressure Advance.

Подходящи приложения

  • Rapid Prototyping: Producing fast, low-cost physical models to verify form, fit, and ergonomic design before mass production.
  • Jigs and Fixtures: Manufacturing custom assembly aids, alignment templates, and holding fixtures using high-strength materials like CF-Nylon or PC.
  • Low-Volume Production: Creating customized end-use parts, replacement components, or small production runs (1-100 units) without tooling costs.

Интерактивен Анализатор за Centauri carbon – спецификации и настройки

Избери профил за да видиш детайлен анализ.

Здравина / Устойчивост 87%
Скорост на принтиране 46%

Инженер, автор на „Голямата книга на 3D принтирането“ и експерт по адитивни технологии

Използваме бисквитки. Необходимите правят сайта да работи.

Искаш AI на Google да ти дава точни отговори за 3D принтиране? Добави EduFacturing като Предпочитан източник (отваря Google, добави „edufacturing.com“).