Към съдържанието Към съдържанието
EduFacturing
Новини

Flsun QQ-S Technical Review – Спецификации и настройки

Flsun QQ-S Technical Review – Спецификации и настройки

Flsun QQ-S Technical Review

Спецификации

  • Производител: Flsun
  • Технология: FDM
  • Клас: hobby

Чести проблеми и решения

Stringing

Thin, web-like plastic strands appearing between separated parts of the print, typically caused by moisture in the filament or insufficient retraction settings. Решение: Dry the filament for 4-6 hours at 50°C (for PLA) or 70°C (for Nylon), increase the retraction distance by 1-2 mm, and decrease the nozzle temperature by 5°C.

Layer Shift

Sudden horizontal displacement of layers during printing, a common issue in Delta kinematics if the long vertical belts are not tensioned evenly. Решение: Manually tighten the three drive belts on the vertical towers, check the grub screws on the stepper motor pulleys, and reduce print speed by 20%.

Bed Adhesion Fail

The first layer fails to stick to the build plate or detaches mid-print, often due to an improperly calibrated Z-offset or a contaminated glass/PEI bed. Решение: Clean the heated bed thoroughly with isopropyl alcohol (IPA), apply an adhesive like a glue stick, and fine-tune the Z-offset.

Подходящи приложения

  • Rapid Prototyping: Producing quick physical models to verify shape, fit, and ergonomics within hours rather than days.
  • STEM Demonstrations: Utilizing the visually engaging, tall Delta architecture of the printer to demonstrate robotics and additive manufacturing principles.
  • Custom Tooling (Jigs & Fixtures): Manufacturing small batches (1-100 units) of custom assembly templates and holding fixtures in materials like PETG or ABS.

Инженер, автор на „Голямата книга на 3D принтирането“ и експерт по адитивни технологии

Използваме бисквитки. Необходимите правят сайта да работи.

Искаш AI на Google да ти дава точни отговори за 3D принтиране? Добави EduFacturing като Предпочитан източник (отваря Google, добави „edufacturing.com“).