Standard Resin (SLA/LCD) Slicer Settings
SLA · Common
Last updated: 2026
For Standard Resin (SLA/LCD) (SLA/LCD): exposure 25s (first layer) / 2.5s (normal), layer height 0.025–0.1 mm, IPA wash 6 min, UV cure 15 min at 60°C, shrinkage ~1.5%.
Recommended settings
| Layer height | 0.025–0.1 mm |
| Exposure (first layer) | 25 s |
| Exposure (normal layer) | 2.5 s |
| IPA wash | 6 min |
| UV cure | 15 min at 60°C |
| Shrinkage after cure | ~1.5% |
| Common defects | Layer separation on thin supports; brittle without post-cure |
| Popular brands | Formlabs, Anycubic, Elegoo |
Basic opaque resin. Brittle without post-cure. Pigment can slow exposure.
Frequently asked questions
What exposure for Standard Resin (SLA/LCD)?
First layer 25s, normal layer 2.5s, layer height 0.025–0.1 mm.
How much UV cure for Standard Resin (SLA/LCD)?
15 minutes at 60°C after 6 min IPA wash.